the MFR-1300 series desoldering and rework systems are the next generation of standalone desoldering equipment from ok international. the new power supply features an internal pump providing 0.7 bar of vacuum suction force combined with smartheat ? technology that makes through-hole desoldering easy and keeps your products safe from board damage. the new hand-piece has been designed to be used in two configurations. the mfr-h5-ds can be used as a pencil or as a a pistol style by simply adding a clip on grip supplied with the hand-piece. solder collection capability has been increased by 40% from previous mfr desolder systems and the innovative replaceable collection chamber enables reduced downtime and quicker changeover. MFR-1300 desoldering system key features self-contained powerful pump 2 in 1 ergonomic and flexible hand-piece: pencil or pistol collection chamber with 40% increased capacity* innovative collection chamber for quick and easy change dual switchable output powered by smartheat ? technology compatible with previous mfr desolder range * compared to the previous mfr-hds desolder hand-piece new pencil pistol www.okinternational.com/oki
mfr-h5-ds - pencil configuration mfr-1350 desolder system mfr-1351 desolder & solder system grip easily clip-on to pencil mfr-dc10 - collection chamber system configurations part no description mfr-1350 dual switchable output desolder system with internal pump mfr-1351 dual switchable output solder / desolder system with internal pump system components part no. description mfr-ps1300 switched dual output power supply with internal pump mfr-h5-ds desolder hand-piece, with selectable grip, and cord mfr-h1-sc solder cartridge hand-piece, with cord mfr-wsdsu universal workstand for desolder hand-piece ws1 universal workstand for solder hand-piece accessories part no. description mfr-dc10 disposable collection chamber for mfr-h5-ds (pack of 10) mfr-dc100 disposable collection chamber for mfr-h5-ds (pack of 100) mfr-ftkit fittings and air hose kit mfr-pg replacement pistol grip for mfr-h5-ds hand-piece mfr-hdca coil assembly for mfr desolder hand-piece - replaceable consumable part mfr-wsdscb desolder workstand cradle ac-sk1 seal kit collection chamber (pack of 2) ac-vp vacuum port ac-vl esd air hose ac-tc desoldering tip cleaner ac-y10 yellow sponge for ws1 workstand (pack of 10) ac-bp brass pad for ws1 workstand (pack of 10) ac-vpf vacuum port filter (pack of 5) cartridges hand-piece cartridges mfr-h5-ds d x p series desoldering cartridges mfr-h1-sc s x p and rx p series soldering and rework cartridges technical specifications mfr-ps1300 power supply mfr-h5-ds desoldering hand-piece mfr-h1-sc soldering hand-piece mfr-wsdsu universal desolder workstand ws1 universal solder workstand mfr-1350 % % % % % % mfr-1351 % % % % % % % % % % 0.2")*+(&+) input line voltage 100-240 vac input line frequency 50/60hz power consumption 110 watts max. (power supply mfr-ps1300) output power 60 watts max (rf smartheat ? power) output frequency 450 khz idle tip temperature stability +/- 1.1c (34f) in still air ambient operating temperature 10 - 40c (50 - 104f) maximum enclosure temperature 55c (131f) noise level < 55 db vacuum suction force 0.7 bar (21in hg at vacuum pump at sea level) power cord (3-wire) 183cm (72") desolder hand-piece cable length 152 cm (60"), burn proof, esd safe solder hand-piece cable length 122 cm (48"), burn proof, esd safe hand piece connector 8 pin power connector tip to ground potential <2mv tip to ground resistance <2 ohms surface resistivity 10 5 C 10 9 ohms approvals ctuvus, ce dimensions (approx.) w x d x h 170mm x 200mm x 152.5mm (7" x 8" x 6") workstand dimensions 100mm x 200mm x 100mm (4" x 8" x 4") 0.2")*(( 38d:8e ,8ec@78d:b9 3ief8ae contact us at europe@okinternational.com or +44 (0)2380 489 100 for more information on the MFR-1300 or if you wish to receive a free desolder coil care sticker, the MFR-1300 maintenance instruction sheet or our desolder video. you can also download these materials by registering to our customer zone at hhh%c<:bf8db5f:cb5@%6ca mfr-h5-ds - pistol configuration fast collection chamber replacement mfr-hdca replacement coil assembly grip supplied with mfr-h5-ds dual switchable output
|
